Skip to main content

Using a Computer: Setting up a computer


So you have a new computer and you're ready to set it up. This may seem like an overwhelming and complicated task, but it's actually a lot easier than you might think! Most computers are set up in a similar way, so it doesn't matter what brand of computer you have.

If you're setting up a new computer that's still in the box, you'll probably find a how-to-guide guide that includes step-by-step details. Even if it didn't include instructions, you can still set up the computer in a few easy steps. We'll take you through the different steps needed to set up a typical computer.

Watch the video below to learn how to set up a desktop computer.


Setting up a laptop computer
If you have a laptop, setup should be easy: Just open it and press the power button. If the battery isn't charged, you'll need to plug in the AC adapter. You can continue using the laptop while it charges.



If your laptop has any peripherals, like external speakers, you may want to read the instructions below. Laptops and desktops generally use the same types of connections, so the same steps will still apply.

Setting up a desktop computer

 Step 1
Unpack the monitor and computer case from the box. Remove any plastic covering or protective tape. Place the monitor and computer case on a desk or work area.

Be sure to place your computer case in an area that is well ventilated and has good air flow. This will help to prevent the computer from overheating.

Step 2
Locate the monitor cable. There are several types of monitor cables, so the one for your computer may not look like the one in the image below.

If you're having trouble finding your monitor cable, refer to the instruction manual for your computer. (If you have an all-in-one computer that's built into the monitor, you can skip to Step 4).

Step 3
Connect one end of the cable to the monitor port on the back of the computer case and the other end to the monitor. If you're using a VGA cable like the one in the picture below, you'll want to tighten the screws on the monitor cable to secure it.

Many computer cables will only fit a specific way. If the cable doesn't fit, don't force it or you might damage the connectors. Make sure the plug aligns with the port, then connect it.

Step 4
Unpack the keyboard and determine whether it uses a USB (rectangular) connector or a PS/2 (round) connector. If it uses a USB connector, plug it into any of the USB ports on the back of the computer. If it uses a PS/2 connector, plug it into the purple keyboard port on the back of the computer.

 plugging in a VGA cable

Step 5
Unpack the mouse and determine whether it uses a USB or PS/2 connector. If it uses a USB connector, plug it into any of the USB ports on the back of the computer. If it uses a PS/2 connector, plug it into the green mouse port on the back of the computer.

plugging in a usb cable

If your keyboard has a USB port, you can connect your mouse to the keyboard instead of connecting it directly to your computer.

If you have a wireless mouse or keyboard, you may need to connect a Bluetooth dongle (USB adapter) to your computer. However, many computers have built-in Bluetooth, so an adapter may not be necessary.

Step 6
If you have external speakers or headphones, you can connect them to your computer's audio port (either on the front of back of the computer case). Many computers have color-coded ports. Speakers or headphones connect to the green port, and microphones connect to the pink port. The blue port is in the line in, which can be used with other types of devices.

plugging in the speakers

Some speakers, headphones, and microphones have USB connectors instead of the usual audio plug. These can be connected to any USB port. In addition, many computers have speakers or microphones built into the monitor.

Step 7
Locate the two power supply cables that came with your computer. Plug the first power supple cable into the back of the computer case and then into a surge protector. Then, using the other cable, connect the monitor to the surge protector.

 plugging the computer into the surge protector
You can also use an uninterrupted power supply (UPS), which acts as a surge protector and provides temporary power if there is a power outage.

Step 8
Finally, plug the surge protector into a wall outlet. You may also need to turn on the surge protector if it has a power switch.

plugging the surge protector into the wall

If you don't have a surge protector, you can plug the computer directly into the wall. However, this is not recommended because electrical surges can damage your computer.

Step 9
If you have a printer, scanner, webcam, or other peripherals, you can connect them at this point. Many peripherals are plug and play, which means they will be recognized by your computer as soon as they are plugged in.

Other peripherals may include software that needs to be installed before you can begin using them. Use the instructions included with the device to install it if necessary.

Generally, peripherals are optional, and you can add new ones at any time; you don't have to add all peripherals during the initial setup of your computer.

Setup complete!
That's it -- you've finished setting up your computer, so it's time to start using it! We'll talk more about how to use your computer over the next several lessons.















Comments

Post a Comment

Popular posts from this blog

Email Basics: Common Email Features

Introduction No matter which email service you choose, you'll need to learn how to interact with an email interface, including the inbox, the Message pane, and the Compose pane. Depending on the email provider, the interfaces may look and feel different, but they all function  in essentially the same way. In this lesson, we'll talk about using an email interface to send and receive messages. We'll also discuss various terms, actions, and features that are commonly used when working with email. Understanding the email interface Below are some examples of different email interfaces from Gmail. Review the images below to become familiar with various email interfaces. * Keep in mind that these examples will only provide a general overview. You can visit our Gmail tutorial to learn how to use an email application in detail.  Inbox The inbox is where you'll view and manage emails you receive. Emails are listed with the name of the sender, the subject of the messag
Post a Comment
Read more

Computer Basics: Basic Parts of a Computer

Introduction The basic parts of a desktop computer are the computer case, monitor, keyboard, mouse, and power cord. Each part plays an important role whenever you use a computer. Watch the video below to learn about the basic parts of a desktop computer. Computer case The computer case is the metal and plastic box that contains the main components of the computer, including the motherboard, central processing unit (CPU), and power supply. The front of the case usually has an On/Off button and one or more optical drives. Computer cases come in different shapes and sizes. A desktop case lies flat on a desk, and the monitor usually sits on top of it. A tower case is tall and sits next to the monitor or on the floor. All-in-one computers come with the internal components built into the monitor, which eliminates the need for a separate case. Monitor The monitor works with a video card, located inside the computer case, to display images and text on the screen. Most monitors have control but
Post a Comment
Read more

Computer Basics: Buttons and Ports on a Computer

Introduction Take a look at the front and back of your computer case and count the number of buttons, ports, and slots you see. Now look at your monitor and count any you find there. You probably counted at least 10, and maybe a lot more. Each computer is different, so the buttons, ports, and sockets will vary from computer to computer. However, there are certain ones you can expect to find on most desktop computers. Learning how these ports are used will help whenever you need to connect something to your computer, like a new printer, keyboard, or mouse. Watch the video below to learn about the buttons, ports, and slots on a desktop computer. Front of a computer case Back of a computer case The back of a computer case has connection ports that are made to fit specific devices. The placement will vary from computer to computer, and many companies have their own special connectors for specific devices. Some of the ports may be color coded to help you determine which po
Post a Comment
Read more